Fabric options in marine upholstery and trimming

Some of the upholstery options for boats are the same as the typical fabrics used in normal car roof lining repair Sydney. However, marine conditions, especially for boats that sail in salty waters, require a higher degree of craftsmanship and sturdiness. Here are some common fabric options.
Vinyl is one of the most commonly used fabric options. According to experts, its characteristics make it one of the most appropriate marine upholstery fabric options. It has been tried and tested over the years, and can be used both in the exterior and interior of the boat. Vinyls have been known to resist mold and mildew, corrosion by chemicals and the effect of insects. They are made of polyvinyl chloride, with a 100 per cent polyester backing. With these core materials, they can offer strength, resistance to abrasion and low rates of absorbency. This makes them uniquely easy to care for since they do not attract mildew and mold. The rigidness however gets in the way of the breathability that other fabric options offer.
Polypropylene also offers many of the same characteristics that vinyl offers. Called polyolefin in some circles, it resists deterioration from chemicals and perspiration. It discourages the development of mildew and prevents rot. It is also the lightest of the fabric options, making it ideal for consideration by marine trimmers. It offers excellent insulation and has high wicking characteristics. It is however an expensive choice. 

Rayon is another fabric option. Compared to polypropylene and Vinyl, the protection it offers from abrasion is fair. It is also relatively poor in terms of mildew resistance. Experts advise that when it gets wet, it is bound to lose up to 50 per cent of its strength. It is also prone to shrinking when it gets wet, which can be a problem with the materials upholstered.
Another common fabric option is synthetic leather. This is strictly an option for the interior unlike other fabrics. It is made purely of polyurethane and is called ultra-leather in some circles. The aesthetic appeal will impress most boat customizers. In addition, its physical properties are impressive. It has the abrasion resistance to exceed hundreds of thousands of double rubs, and is resistant to stains, soil and is waterproof. It has 100 per cent backing of reinforced rayon.
Triacetate finishing is not as sensitive to heat as other fabrics. This makes it easy to be pleated and creased crisply. They offer a smooth and luxurious looking feel. This material also offers good stability over a wide range of dimensions. It can be removed and washed and dried using a washing machine. However, users should know that at temperatures of over 300 degrees, they will melt. They are also likely to be dissolved by paint removers, nail polish and some perfume varieties.
Acrylic resembles wool in terms of softness and size. In fact, many acrylic fibers are reinforced with polyester or wool fibers. This gives them excellent wicking properties and makes them resistant to moths, mildew, chemicals and oils. It is a stain resistant fiber option, and as an abrasion resistance of over 50,000 double rubs.